G436T15N Germicidal UVC Lamp – 26W Preheat-Start
The G436T15N germicidal UVC lamp is a medium-length, low-pressure ultraviolet lamp designed for preheat-start disinfection systems that require reliable UVC performance with increased coverage length. Operating in the germicidal UVC range, this lamp is suitable for enclosed air, water, and surface disinfection applications where consistent output and broader exposure zones are needed.
With its extended arc length and slim 15 mm diameter, the G436T15N provides improved UVC distribution compared to shorter lamps, making it suitable for medium-sized chambers and OEM equipment. Designed for preheat-start operation, the lamp delivers stable germicidal output throughout its rated service life when used with compatible starters and control gear.
Key Features
-
Germicidal UVC lamp for professional disinfection systems
-
Medium-length design for increased UVC coverage
-
Preheat-start operation
-
Reliable UVC output across rated lamp life
-
Suitable for replacement use in compatible preheat-start UVC systems
Technical Specifications
Lamp Type: G436T15N
Total Length: 436 mm
Arc Length: 360 mm
Lamp Diameter: 15 mm
Electrical Values:
-
Voltage: 62 V
-
Current: 0.425 A
-
Input Power: 26 W
UVC Output:
-
UVC Output Power: 7.3 W
-
UV Intensity @ 1 m: 72 µW/cm²
Rated Lamp Life: 9,000 hours
Applications
✔ Medium-sized air disinfection systems
✔ Water treatment units requiring moderate UV dose
✔ Enclosed surface disinfection equipment
✔ OEM and replacement use in preheat-start UVC devices
Warnings and Safety
⚠ DANGER – Risk Group 3 Ultraviolet Product
This lamp emits UVC radiation that can cause serious injury to skin and eyes.
-
Avoid direct exposure to UVC radiation
-
Use only in fully enclosed or shielded systems
-
Not suitable for open or occupied environments
In the unlikely event of lamp breakage, ventilate the area for at least 30 minutes. Handle broken parts with gloves, place them in a sealed container, and dispose of them according to local waste and recycling regulations. Do not use a vacuum cleaner.
Replacement Information
This lamp is intended for use as a replacement germicidal UVC lamp in compatible preheat-start systems designed for the G436T15N format. Always confirm electrical ratings, starter requirements, and physical dimensions before installation.
